If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Konica Minolta Bizhub i series storage board (STRGB)
[Misc]
Konica Minolta Bizhub i series storage board (STRGB)
Quick question, regarding the known storage board issues, usually not booting up / stuck at 25% or 50%
We had this exact issue on a C250i, fitted a new STRGB followed the service manual, updated firmware etc etc device came to ready, job done.
Now I took the old storage board away, connected to a USB caddy in a laptop (recommended by Konica Minolta UK) & was I able to format the STRGB in Windows, delete all partitions to effectively create a 'new' storage board.
I have yet to try this memory board in another i series device.
Re: Konica Minolta Bizhub i series storage board (STRGB)
Originally posted by copier tech
Quick question, regarding the known storage board issues, usually not booting up / stuck at 25% or 50%
We had this exact issue on a C250i, fitted a new STRGB followed the service manual, updated firmware etc etc device came to ready, job done.
Now I took the old storage board away, connected to a USB caddy in a laptop (recommended by Konica Minolta UK) & was I able to format the STRGB in Windows, delete all partitions to effectively create a 'new' storage board.
I have yet to try this memory board in another i series device.
Interested to hear your views on this.
This is the device we used.
https://www.amazon.com/dp/B08H22BV1N?th=1
If the STRGB is not physically damaged, you can connect it to a computer, erase the partitions and format it in FAT32, and it would be ready to work on another computer, suitable for any model of the "i" series.
But it is even easier to make the partition on the machine itself with the "magic sequence", as long as it allows us to boot with the USB that contains the FW.
Re: Konica Minolta Bizhub i series storage board (STRGB)
Originally posted by elmaligno
If the STRGB is not physically damaged, you can connect it to a computer, erase the partitions and format it in FAT32, and it would be ready to work on another computer, suitable for any model of the "i" series.
But it is even easier to make the partition on the machine itself with the "magic sequence", as long as it allows us to boot with the USB that contains the FW.
Do you mean that we can put troubled SSD into working machine and try "magic sequence"?
We have a couple of replaced SSDs sitting on the shelf, can we revive some?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Re: Konica Minolta Bizhub i series storage board (STRGB)
Originally posted by tsbservice
Do you mean that we can put troubled SSD into working machine and try "magic sequence"?
We have a couple of replaced SSDs sitting on the shelf, can we revive some?
Re: Konica Minolta Bizhub i series storage board (STRGB)
Originally posted by tsbservice
Do you mean that we can put troubled SSD into working machine and try "magic sequence"?
We have a couple of replaced SSDs sitting on the shelf, can we revive some?
This is what I was hoping, mine was corrupted, but worked fine when fitted to this caddy.
So in the caddy do I delete all partitions so the board is basically blank & I can use it in another i series ?
Re: Konica Minolta Bizhub i series storage board (STRGB)
We had some that tested okay in a caddy but would not work in the machine for whatever reason. You could read and write ok on the computer however.
Seems to mostly work great to clean the drive in disk part and then initialize the drive as raw.
Re: Konica Minolta Bizhub i series storage board (STRGB)
Originally posted by copier tech
This is what I was hoping, mine was corrupted, but worked fine when fitted to this caddy.
So in the caddy do I delete all partitions so the board is basically blank & I can use it in another i series ?
The 'magic' sequence is attached below.
[ATTACH]61536[/ATTACH]
I use testdisk in the caddy. clear it partition and format fat 32, hammer with testing ap for a few days ,if no problems, clear it to raw with the testdisk ap and reuse in copier. I have found that the early ssds actually failed, while the later ones where just corrupt.
Quick question, regarding the known storage board issues, usually not booting up / stuck at 25% or 50%
We had this exact issue on a C250i, fitted a new STRGB followed the service manual, updated firmware etc etc device came to ready, job done.
Now I took the old storage board away, connected to a USB caddy in a laptop (recommended by Konica Minolta UK) & was I able to format the STRGB in Windows, delete all partitions to effectively create a 'new' storage board.
I have yet to try this memory board in another i series device.
Interested to hear your views on this.
This is the device we used.
https://www.amazon.com/dp/B08H22BV1N?th=1
Do you happen to test this yet?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Re: Konica Minolta Bizhub i series storage board (STRGB)
We had some that tested okay in a caddy but would not work in the machine for whatever reason. You could read and write ok on the computer however.
Seems to mostly work great to clean the drive in disk part and then initialize the drive as raw.
Same here, wiped drives work fine on PCs and even the KM does rebuild it's partitions but won't accept the drive afterwards. Guess you have to run the reset tool but then you'll loose all data/counter.
One might use a donator C300i and run the reset tool with a "faulty" drive installed and instead of rebooting the MFP just shut it down after the reset procedure and uninstall the drive.
Perhaps a storage board treated this way can be use as a replacement in other units.
Cases with faulty drives has become very very rare compared to the amount of issues we had after the iSeries launch so I didn't really investigated in that matter.
We have good luck with most of the drives in a caddy other than Toshiba ones. They seem to just fail. They get that hot they can’t even be touched.
later firmware seems to have mostly resolved the issue for us!
Quick question, regarding the known storage board issues, usually not booting up / stuck at 25% or 50%
We had this exact issue on a C250i, fitted a new STRGB followed the service manual, updated firmware etc etc device came to ready, job done.
Now I took the old storage board away, connected to a USB caddy in a laptop (recommended by Konica Minolta UK) & was I able to format the STRGB in Windows, delete all partitions to effectively create a 'new' storage board.
I have yet to try this memory board in another i series device.
Interested to hear your views on this.
This is the device we used.
https://www.amazon.com/dp/B08H22BV1N?th=1
Maybe Call HyTech and talk to their support team they rebuild SSD all the time maybe they will lead you in the right direction to reformat it. Here is the # and the ext. for the Konica Tech
We have good luck with most of the drives in a caddy other than Toshiba ones. They seem to just fail. They get that hot they can’t even be touched.
later firmware seems to have mostly resolved the issue for us!
Our observations show that STRGB is damaged like a regular SSD or blocked to write as a result of unauthorized action.We use disks from a source other than KM and the problem disappeared. There is no need to format and delete partitions on the PC, I don't really understand what the need is.
is it possible to have the firmware aa2j0y0-1e00-g00-24?
thanks
That is a really really old firmware. Are you asking for that version for the boot rom update? That key sequence works all the way up to the newest firmware from Konica. No need to use the old one.
Worked in IT for 12 years from Helpdesk up to System Administrator. Now working as the IT Manager at a copier company for the last 5 years.
A favorite resort of the foreign residents of Yokohama during the summer months is the island of Enoshima. It is about twenty miles away, and is a noted place of pilgrimage for the Japanese, on account of certain shrines that are reputed to have a sacred character. Doctor Bronson arranged that his party should pay a visit to this island, as it was an interesting spot, and they could have a glimpse of Japanese life in the rural districts, and among the fishermen of the coast. "But as we are in for it," he continued, "we must make the best of the situation, and hope to go through in safety. Many a strong ship lies at the bottom of the sea, where she was sent by just such a storm as we are about to pass through, and many another has barely escaped. I was once on a ship in the China seas, when the captain told the passengers that it would be a miracle if we remained half an hour longer afloat. But hardly had he done speaking when the wind fell, the storm abated, and we were safe. The typhoon is to these waters what the hurricane is to the West Indies; it is liable to blow at any time between April and September, and is often fearfully destructive. OPIUM-PIPE. OPIUM-PIPE. "Surely your ladyship knows Dr. Bruce!" Hetty said with a vivid splash of colour on either cheek "A little time ago I understood that Dr. Bruce----" "I require that everywhere a strict investigation shall take place into the conduct of the soldiers with regard to the life and property of the civilian population. "Where were they buried?" They all pressed forward. "Count out. That's the only fair way," shouted the boys in the center. "Now, there's three loaves o' bread for the Sargint," said Harry, laying them down on a newspaper. "There's three for the Corpril; there's three for me; there's three for you." "'T?un't peas, thick 'un," Vennal would break in uproariously, "it's turnips—each of 'em got a root like my fist." At this moment of perplexity, some medicine, that she had obtained from Edith, occurred to her, and, with a feeling of confidence, and almost of extacy, she took a phial from a shelf in a cupboard where she had placed it, and, pouring out the contents in a large spoon, hesitated an instant ere she administered it. "Let me see," said she; "surely it was a large spoonful Edith told me to give—yet all that was in the phial doesn't fill the spoon. Surely I can't be wrong: no—I remember she said a large spoonful, and we didn't talk of any thing else—so I must be right." But Mary still hesitated, till, hearing a sudden noise in the court-yard, which, she conjectured, was her mistress returned, and as the child was getting worse every moment, she leaned back its head, and, forcing open its mouth, compelled the patient, though with difficulty, to swallow its death. The draught was taken; the rigid muscles relaxed, and for a minute the child lay motionless in her lap; but in an instant after, Mary could scarcely suppress a shriek at the horrid sight that met her gaze. The eyes opened, and glared, and seemed as if starting from the head—the fair face and the red lips, were blue, deepening and deepening, till settling in blackness—the limbs contracted—the mouth opened, and displayed a tongue discoloured and swollen—then came a writhing and heaving of the body, and a low, agonized moan: and, as Mary looked almost frantic at this dreadful sight, Edith's words, when she had given her the phial, "that there was enough there to kill," suddenly occurred to her—and then, too, came, with a dreadful distinctness, the remembrance of the true directions which Edith had given. It was nearly noon the next day, when the under-sheriff entered the room to ask if their opinions were yet unanimous. The galleyman still refused. "That for ye, coward," said Tyler, striking him with the flat side of his bared weapon. Oakley aimed another thrust which was again turned aside, and the smith, now flinging down his sword, seized upon his right hand and wrenched the dagger from its grasp. After a short struggle, Oakley fell heavily on the pavement with the blood streaming from his mouth and nostrils. HoME萝拉泷泽第4部资源
ENTER NUMBET 0016mgchain.com.cn gdhangfa.com.cn henryxuan.com.cn px8news.com.cn www.nbqs.com.cn www.shenyanyi.com.cn qzpock.com.cn www.vsuzhou.com.cn qhmw.com.cn www.nic360.com.cn
Comment