If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
I work over at Konica and we had a bunch of 450is ship with G00-Q8. I have flash drives that work on 7 series, 4 series and 4 series but they won't work on these I series machines with Q8. I don't think it is the flash drive because when nothing is loaded on the flash driver or there is no flash driver inserted it just skips the set up. When I load firmware on a stick and place it in the machine and run the normal firmware reset procedure (stop button on the back while powering up the machine) all the machine does it get the black dot and stick at 1/4 on the progress bar.
I am about to just let the RSP technicians upgrade the machine's firmware but I wanted to know if anyone has got a Q8 machine to upgrade via usb.
Yes the machine's admin settings is toggled on to allow firmware from a USB
Yes I have ran the HPUSBDISK utility.
Re: Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
Couple of questions. Is it a machine with a memory board or without? Easy way to check is by serial number, other way to check is to remove the rear cover, and check. Is it a black and white machine? Try flashing base firmware first as well, G00-Q9. There is also G00-RB available now too.
Re: Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
Originally posted by AlaskaCopyTech
I work over at Konica and we had a bunch of 450is ship with G00-Q8. I have flash drives that work on 7 series, 4 series and 4 series but they won't work on these I series machines with Q8. I don't think it is the flash drive because when nothing is loaded on the flash driver or there is no flash driver inserted it just skips the set up. When I load firmware on a stick and place it in the machine and run the normal firmware reset procedure (stop button on the back while powering up the machine) all the machine does it get the black dot and stick at 1/4 on the progress bar.
I am about to just let the RSP technicians upgrade the machine's firmware but I wanted to know if anyone has got a Q8 machine to upgrade via usb.
Yes the machine's admin settings is toggled on to allow firmware from a USB
Yes I have ran the HPUSBDISK utility.
I have found that the usb 3.0 sticks from Micro center work when no other sticks will, here is where I get mine https://www.amazon.com/dp/B09G2Q8NYP...t_details&th=1
It is also recommended that the boot rom be updated before trying to upgrade firmware. I tried attaching the boot rom instructions but unsuccessful . I have attached them in the past so you can search the forms and find them or I can email them to you .
The new firmware G00-RB is function version 2.3 (SW25 HEX 40) which will require updating movie , voice data and LDD if you have a card reader
Re: Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
I have done numerous machines from P8 to Q9, GC2-Q9 and even RB. I don't believe it's firmware related. May be something to do with wrong firmware folder. The only times when I cannot update them from 1sr try machine will wait and eventually reboot itself at the same time same model machine next to troubled one would happily take firmware from the same flash drive. I put multiple firmware folders on the same usb stick and don't bother with model usually.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Re: Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
I used Transcend Jet flash and still use them occasionally but switched to another don't remember brand but it's short about an inch like and doesn't stuck from copier USB port making me nervous that wandering users can broke it will firmware update is in progress.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Re: Trying to upgrade from Q8 to GC2-Q9 locks the display and doesn't work.
Originally posted by AlaskaCopyTech
I work over at Konica and we had a bunch of 450is ship with G00-Q8. I have flash drives that work on 7 series, 4 series and 4 series but they won't work on these I series machines with Q8. I don't think it is the flash drive because when nothing is loaded on the flash driver or there is no flash driver inserted it just skips the set up. When I load firmware on a stick and place it in the machine and run the normal firmware reset procedure (stop button on the back while powering up the machine) all the machine does it get the black dot and stick at 1/4 on the progress bar.
I am about to just let the RSP technicians upgrade the machine's firmware but I wanted to know if anyone has got a Q8 machine to upgrade via usb.
Yes the machine's admin settings is toggled on to allow firmware from a USB
Yes I have ran the HPUSBDISK utility.
We run into this issue from time to time.
A few weeks ago at a large college I was running round updating a load of iseries & the odd one or two wouldn't update using the same firmware / stick that worked on the others.
I left them to last then went back & they would accept the update! no real reason. Just keep trying it should eventually update.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
A favorite resort of the foreign residents of Yokohama during the summer months is the island of Enoshima. It is about twenty miles away, and is a noted place of pilgrimage for the Japanese, on account of certain shrines that are reputed to have a sacred character. Doctor Bronson arranged that his party should pay a visit to this island, as it was an interesting spot, and they could have a glimpse of Japanese life in the rural districts, and among the fishermen of the coast. "But as we are in for it," he continued, "we must make the best of the situation, and hope to go through in safety. Many a strong ship lies at the bottom of the sea, where she was sent by just such a storm as we are about to pass through, and many another has barely escaped. I was once on a ship in the China seas, when the captain told the passengers that it would be a miracle if we remained half an hour longer afloat. But hardly had he done speaking when the wind fell, the storm abated, and we were safe. The typhoon is to these waters what the hurricane is to the West Indies; it is liable to blow at any time between April and September, and is often fearfully destructive. OPIUM-PIPE. OPIUM-PIPE. "Surely your ladyship knows Dr. Bruce!" Hetty said with a vivid splash of colour on either cheek "A little time ago I understood that Dr. Bruce----" "I require that everywhere a strict investigation shall take place into the conduct of the soldiers with regard to the life and property of the civilian population. "Where were they buried?" They all pressed forward. "Count out. That's the only fair way," shouted the boys in the center. "Now, there's three loaves o' bread for the Sargint," said Harry, laying them down on a newspaper. "There's three for the Corpril; there's three for me; there's three for you." "'T?un't peas, thick 'un," Vennal would break in uproariously, "it's turnips—each of 'em got a root like my fist." At this moment of perplexity, some medicine, that she had obtained from Edith, occurred to her, and, with a feeling of confidence, and almost of extacy, she took a phial from a shelf in a cupboard where she had placed it, and, pouring out the contents in a large spoon, hesitated an instant ere she administered it. "Let me see," said she; "surely it was a large spoonful Edith told me to give—yet all that was in the phial doesn't fill the spoon. Surely I can't be wrong: no—I remember she said a large spoonful, and we didn't talk of any thing else—so I must be right." But Mary still hesitated, till, hearing a sudden noise in the court-yard, which, she conjectured, was her mistress returned, and as the child was getting worse every moment, she leaned back its head, and, forcing open its mouth, compelled the patient, though with difficulty, to swallow its death. The draught was taken; the rigid muscles relaxed, and for a minute the child lay motionless in her lap; but in an instant after, Mary could scarcely suppress a shriek at the horrid sight that met her gaze. The eyes opened, and glared, and seemed as if starting from the head—the fair face and the red lips, were blue, deepening and deepening, till settling in blackness—the limbs contracted—the mouth opened, and displayed a tongue discoloured and swollen—then came a writhing and heaving of the body, and a low, agonized moan: and, as Mary looked almost frantic at this dreadful sight, Edith's words, when she had given her the phial, "that there was enough there to kill," suddenly occurred to her—and then, too, came, with a dreadful distinctness, the remembrance of the true directions which Edith had given. It was nearly noon the next day, when the under-sheriff entered the room to ask if their opinions were yet unanimous. The galleyman still refused. "That for ye, coward," said Tyler, striking him with the flat side of his bared weapon. Oakley aimed another thrust which was again turned aside, and the smith, now flinging down his sword, seized upon his right hand and wrenched the dagger from its grasp. After a short struggle, Oakley fell heavily on the pavement with the blood streaming from his mouth and nostrils. HoME萝拉泷泽第4部资源
ENTER NUMBET 0016guituapp.com.cn www.epchain.com.cn fypcic.com.cn euhdgn.com.cn www.viviyp.org.cn www.mskvt.com.cn www.sptqyh.com.cn www.qrogmm.com.cn www.stackcube.com.cn inbp.com.cn
Comment